- Catalog Home
- Performance, Engine & Drivetrain
- Exhaust
- Heat Shield Sleeve
Heat Shield Sleeve
- No Need To Remove Wires/Cables Or Hoses/Can Be Slit Lengthwise
- Reflects 750 Degrees F Direct Continuous Heat
- Easily Trim To Length
- Tough/Durable With An Easy To Clean Finish
- 1/2 in x 3 ft
- Silver
- Has A 304 Stainless Mesh Outer Covering
- Includes a 16 in. Length Of Fire Tape
- Insulates Wiring/Hoses/Oil/Brake/Transmission Lines And More
- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Burn Protection During Under Hood Repairs/Maintenance
- Use For Bundling And Protecting Hoses/Electrical Wiring etc.
- Hook and Loop Fastener
- Protects From Extreme Heat
- Thermal And Abrasion Resistance
- Silicone Coated Fiberglass Fire Sleeving
- Continuous Protection To 500 Degrees
- Short Term Protection Exposure To 2200 Degrees
- Aluminum
- Features An Aluminized Heat Shield
- Easy Slip-On Installation
- Outstanding Protection For Wires/Hoses/Cables
- 90 Day Limited Warranty
- Aluminum
- Features An Aluminized Heat Shield
- Easy Slip-On Installation
- Outstanding Protection For Wires/Hoses/Cables
- 90 Day Limited Warranty
- Fiberglass Paper Insulation
- Fire Tape Not Included
- Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Burn Protection During Under Hood Repairs And Maintenance
- Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
- Corrosion And Moisture Resistant
- 700 psi Tensile Strength
- Stretch And Wrap Application
- Permanent Air/Liquid Tight Seal
- Withstands 500Degrees F Direct Continuous Heat
- Withstands 500 Degrees F Direct Continuous Heat
- Self-Bonding And Self-Curing
- Does Not Harden Remains Flexible
- 36 ft. x 1 in. Wide Roll
- Withstands Direct Heat Up To 500 Degrees F
- Protects Against Oil/Dirt/Road Grime And Other Contaminates
- Pliable Enough To Shape And Fit Tightest Bends
- Hook And Loop Fastening System For Easy Installation
- 5/8 in. Id X 2 ft.
- Polymer
- 90 Limited Warranty
- Fiberglass
- Protection From Constant Temps Up To 500 deg.
- 90 Day Limited Warranty
- Reflect Direct Heat Up To 800 Degree Fahrenheit
- 20 o.z. Heat Treated Lock Weave Glass Fiber Material
- Metalized Polymide
- Tested To FSTM 191.5100
- Tested To ASTM D1117
- Capable Of Withstanding 500 Degrees F Direct/2000 Degrees F Radiant Heat
- Pliable For Tight Bends
- Trim To Desired Length
- Reduces Heat Radiating From The Exhaust System Giving The Rider And Passenger A Cooler Ride
- This Is Especially Noticeable When The Rider Stops And Puts Their Feet On The Ground
- CNC Cut For A Perfect Fit
- Completely Hidden When Installed
- High Temperature Hook And Loop Fastening System
- Reflects Up To 800 Degrees F Of Heat
- 20Oz Heat Treated Weave Lock Glass Fiber
- Tested To FSTM 191.5100 Standards
- Tested To ASTM D1117 Standards
- Fits 1/2 in. To 1-1/4 in. X 36 in. Dia.
- Metalized Polyimide Lamination
- No Need To Remove Wires And Hoses
- Convenient Hook/Loop Closure Design
- Withstands 500 Degrees F Direct Continuous/2000 Degrees F Radiant Heat
- Reflects 90 Percent Of Radiant Heat
- Easily Trim To Length
- Fireproof
- 1 in. X 3 ft.
- Protects From Extreme Heat
- Thermal And Abrasion Resistance
- Silicone Coated Fiberglass Fire Sleeving
- Continuous Protection To 500 Degrees
- Short Term Protection Exposure To 2200 Degrees
- Helps Prevent Vapor Lock
- Flexible/Expandable And Abrasion Resistant
- Offers Maximum Protection Against Spark Loss
- Inside Is Braided E-Glass Insulation
- Silicone Outer Surface
- Powersports Heat Shield Liner Kit
- 2 in. ID x 3 ft.
- Includes Two 75 mm x 3 in. Black Spark Plug Wire/Boot Shrink Tubes
- Protects Plug Wires From Hot Exhaust Manifolds And Headers
- Made From The Same Material As Our Titanium Exhaust Wrap
- Can Withstand Temperatures To 1800 Degrees
- Chemical And Abrasion Resistant
- Meets USAC Requirements For Fireproof Fuel Line Cover
- Rated To A Max Temperature Of 520 Degrees F For 136 Hours
- Includes 1.5 ft Of 3/8 in. ID Silicone Covered Glass Braided Sleeving
- Includes Four 18 mm Heat Shrink Ends
- Fiberglass
- Protect Your Spark Plug Wires
- Easy Slip On Braided Insulation Sleeves
- Protects Up To 1200 deg. F
- Requires No Clearance From Heat Source
- 90 Day Limited Warranty
- Unlimited Uses
- Abrasion Resistant
- Flexible Sleeving
- Light Weight And Strong
- Withstands Temperatures Up To 750 Degrees
- Protects Hoses And Wires From Radiant Heat
- Reflects More Than 90 Percent Of Radiant Heat
- Fireproof
- Oil Resistant
- Light Weight Construction
- 0.5 in Id x 4ft
- Includes Ten 18 mm X 1.5 in. Black Spark Plug Wire/Boot Shrink Tubes
- Protects Plug Wires From Hot Exhaust Manifolds And Headers
- Made From The Same Material As Our Titanium Exhaust Wrap
- Can Withstand Temperatures To 1800 Degrees
- Chemical And Abrasion Resistant
- Easy To Cut/Trim To Length
- Ultra Lightweight- 40 Percent Lighter Than Most Line Sleeving