• (916) 485-5072

Keyword Search


Select a Vehicle

Brand

  • Design Engineering
  • MSD Ignition
  • Taylor Cable

Heat Shrink Sleeve

Design Engineering 

Fire Sleeve/Tape Kit™

7 Parts

Fire Sleeve/Tape Kit™
  • Includes a 16 in. Length Of Fire Tape
  • Insulates Wiring/Hoses/Oil/Brake/Transmission Lines And More
  • Withstands 500 ° F Continuous/2000 ° F Intermittent Heat
  • Burn Protection During Under The Hood Repairs And Maintenance
  • Use For Bundling And Protecting Hoses/Electrical Wiring etc.

See All

Taylor Cable 

Heat Shrink Sleeves

2 Parts

Heat Shrink Sleeves
  • Complete Seal Between Wire/Spark Plug/Boot
  • 10 Per Package

See All

Design Engineering 

Heat Shrink w/Adhesive

1 Parts

Heat Shrink w/Adhesive
  • 3 To 1 Shrink Ratio
  • Seals And Prevents Water From Entering
  • Rated To 275 Degrees Fahrenheit
  • 19mm Inside Diameter
  • 2 Feet ln Length

See All

Design Engineering 

Hi-Temp 3:1 Shrink Tubing Kit™

2 Parts

Hi-Temp 3:1 Shrink Tubing Kit™
  • Use To Insulate Wires/Connections/Terminals/Wire Splitting
  • 3:1 Shrink Ratio
  • Operating Temp Range -67 ° F To 275 ° F
  • Thick Wall Construction And Remains Flexible
  • Max Operating Temp: 394 ° F For Short Duration
  • Easy To Install: Apply At 120 To 180 ° F Using Heat Gun
  • Offers Clean Professional Look
  • Meets MIL Spec DTL-23053/5C
  • Flame Retardant
  • Alternate To Plastic Ties And Tape

See All

Design Engineering 

Hi-Temp 3:1 Shrink Tubing™

12 Parts

Hi-Temp 3:1 Shrink Tubing™
  • Use To Insulate Wires/Connections/Terminals/Wire Splitting
  • 3:1 Shrink Ratio
  • Operating Temp Range -67 ° F To 275 ° F
  • Thick Wall Construction And Remains Flexible
  • Max Operating Temp: 394 ° F For Short Duration
  • Easy To Install: Apply At 120 To 180 ° F Using Heat Gun
  • Offers Clean Professional Look
  • Meets MIL Spec DTL-23053/5C
  • Flame Retardant
  • Alternate To Plastic Ties And Tape

See All

Design Engineering 

Hi-Temp Heat Shrink Tube™

10 Parts

Hi-Temp Heat Shrink Tube™
  • 3:1 Shrink Ratio
  • High Temperature Rating
  • Stays Flexible

See All

Design Engineering 

Hi-Temp Shrink Tube™

8 Parts

Hi-Temp Shrink Tube™
  • Offers A Clean/Professional Under Hood Look
  • 3:1 Shrink Ratio
  • 25 Tubes To A Package
  • Easy To Install with Ordinary Heat Gun
  • Available In Gray/Black/Red And Blue

See All

MSD Ignition 

MSD Heat Shrink Kit

1 Parts

MSD Heat Shrink Kit
  • Dual Wall Shrink Tube [Waterproof]
  • Tube Sizes From 1/8 in. - 1 in.
  • Material: Polyolefin [Red and Black]
  • Temperature Rated At -45° C - 125° C [-49° - 257° F]
  • Starting Temperature: Start At 70° C [158° F]
  • Complete Shrunk At 120° C [248° F]
  • Shrink Ratio: 3:1
  • Max Electrical Rating: 600 Volts
  • 115 Piece Kit

See All

MSD Ignition 

MSD Heat Shrink Terminal Kit

1 Parts

MSD Heat Shrink Terminal Kit
  • Polyethylene Insulation [PE] w/Copper Terminal Material
  • Shrink Temperature -10° C - 105° C [-14° - 221° F]
  • Operating Temperature -10° C - 105° C [-14° - 221° F]
  • Shrink Ratio: 3:1
  • Wire Sizes From 10-22 AWG
  • Waterproof
  • 165 Piece Kit

See All

Design Engineering 

Numbered Wire Marker Kit

1 Parts

Numbered Wire Marker Kit
  • Numbered Wire Marker Kit

See All

Taylor Cable 

Reflective Heat Sleeve

1 Parts

Reflective Heat Sleeve
  • Reflects Over 90 Percent Of Engine Radiant Heat
  • Weighs Less Then Old Silicone Cover
  • Superior Heat Protection
  • Withstands 1000 Deg. Continuous Radiant Heat
  • Withstands Up To 500 Deg. Direct Heat

See All

Taylor Cable 

ThunderVolt S-50 Wire Sleeving

1 Parts

ThunderVolt S-50 Wire Sleeving
  • Only 40 OHMS Per Foot Resistance
  • Three Layers Of Pure Zimplex Silicone
  • 102000 Volts Dielectric Strength
  • 600 deg. Heat Protection
  • No Additional Sleeving Required
  • Tightly Woven Heat Treated Fiberglass Braid
  • Pure Silicone Pro Boot Bonded To Wire

See All