• (916) 485-5072

Keyword Search


Select a Vehicle

Brand

  • Design Engineering
  • Thermo Tec

Overall Length

  • 22.000 in.
  • 55.000 in.
  • N/A
  • 4.000 in.
  • 6.000 in.
  • 12.000 in.
  • 12.500 in.
  • 21.000 in.
  • 24.000 in.
  • 33.500 in.
  • 36.000 in.
  • 42.000 in.
  • 48.000 in.
  • 54.000 in.
  • 60.000 in.
  • 75.000 in.
  • 600.000 in.

Width

  • 19.000 in.
  • N/A
  • 10.000 in.
  • 12.000 in. (1 ft.)
  • 12.500 in.
  • 21.000 in.
  • 24.000 in. (2 ft.)
  • 32.000 in.
  • 36.000 in. (3 ft.)
  • 42.000 in.
  • 48.000 in. (4 ft.)
  • 54.000 in.

Sound Damping Material

Design Engineering 

Boom Mat™ Barrier Material

2 Parts

Boom Mat™ Barrier Material
  • Sold In 55 in. Width By The Linear Yard.
  • Easy To Cut And Handle
  • Meets Strict Flammability Standards

See All

Design Engineering 

Boom Mat™ Flex

1 Parts

Boom Mat™ Flex
  • Flexible To Conform To Any Shape
  • Easy Peel Backing Film
  • Easy To Cut
  • 4 sq. ft. Of Material

See All

Design Engineering 

Boom Mat™ Headliner

1 Parts

Boom Mat™ Headliner
  • Adds Additional Sound Deadening And Thermal Insulation
  • Use To Finish Any Interior Panel
  • Easy Peel And Stick
  • 1 in. x 75 in x 54 in.
  • Original Finish Or Leather Look Finish

See All

Design Engineering 

Boom Mat™ Moldable Noise Barrier

1 Parts

Boom Mat™ Moldable Noise Barrier
  • Blocks Unwanted Road Noise When Used Over The Entire Surface Area
  • Easily Removable For Service When Required
  • Moldable Conforms To The Shape Of Your Floor Pan
  • Highly Effective Low Cost Alternative To Using Damping Products
  • Measurable Results
  • 1/16 in. Thick

See All

Design Engineering 

Boom Mat™ Under Hood Thermal Acoustic Lining

1 Parts

Boom Mat™ Under Hood Thermal Acoustic Lining
  • Insulate From Heat While Reducing Noise And Vibration
  • Peel And Stick Application
  • Protects Paint Finishes
  • Resists Oil/Water And Contaminants
  • 3/4 in. Thick
  • 32 in. x 54 in. 12 sq. Feet
  • Use As A Heat And Noise Barrier To Control Under Hood Temp

See All

Thermo Tec 

Cool It™ Insulating Mat

3 Parts

Cool It™ Insulating Mat
  • Great For Heat Protection
  • Great For Noise Reduction
  • Use In Doors And Under Hoods
  • Acts As Sound Insulator

See All

Design Engineering 

Damping Material

9 Parts

Damping Material
  • High Performance Adhesive Lasts Throughout Temperature Extremes
  • Eliminates Low Frequency Noise Problems
  • Easily Trimmed To Size With Boom Mat Blade Lock Knife
  • Non-Hazardous Material
  • Flexible - Can Be Applied To Irregular Surfaces
  • User Friendly Peal And Stick Installation
  • Multiple Uses Including Automotive/Industrial Applications
  • Durable Weatherproof Construction Is Also Corrosion Resistant
  • Flammability Rated
  • The Industry Standard In Vibrational Damping Technology

See All

Design Engineering 

Floor And Tunnel Shield II™

11 Parts

Floor And Tunnel Shield II™
  • Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
  • Blocks Radiant Heat From Entering Driver Compartment
  • Withstands Direct High Temperatures Up To 1750Degrees
  • Serves As A Barrier To Unwanted Road/Tire And Engine Noise
  • Constructed From 10 Mil Aluminum
  • Easy To Form To Shapes And Contours
  • Aggressive Self-Adhesive Backing Holds Past 450 Degrees F
  • Adheres To Almost Any Surface/Material/Fiberglass
  • Minimum Clearance Required Only 3/16 in. Thick
  • Just Trim Peel And Stick
  • 10 in x 10 in / 0.83 sq ft

See All

Design Engineering 

Floor And Tunnel Shield™

3 Parts

Floor And Tunnel Shield™
  • Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
  • Blocks Radiant Heat From Entering Driver Compartment
  • Withstands Direct High Temperatures Up To 1750 Degrees
  • Serves As A Barrier To Unwanted Road/Tire And Engine Noise
  • Constructed From 10 Mil Aluminum
  • Easy To Form To Shapes And Contours
  • Aggressive Self-Adhesive Backing Holds Past 450 Degrees F
  • Adheres To Almost Any Surface/Material/Fiberglass
  • Minimum Clearance Required Only 3/16 in. Thick
  • Just Trim Peel And Stick

See All

Design Engineering 

Form-A-Shield™

3 Parts

Form-A-Shield™
  • Can Be Applied Directly To Hot Surfaces
  • Ideal For Firewalls/Exhaust Manifolds Transmission Tunnels
  • Superior Insulator Anywhere Near The Path Of Exhaust Pipes
  • Withstands Direct Heat Up To 1400 Degrees F
  • Constructed From 10 Mil Aluminum Bonded To 1/4 in. Basalt Mat
  • Extremely Pliable And Forms To Many Shapes And Configurations
  • No Adhesive Backing
  • Fasten With Straps/Clamps Or DEI Locking Ties
  • Durable And Resistant To Oil And Chemical Spills
  • 42 in. x 48 in Shield

See All

Design Engineering 

Interior Sound Deadening Vibration Kit

1 Parts

Interior Sound Deadening Vibration Kit
  • Insulate From Heat While Reducing Noise And Vibration
  • All In One Kit
  • Easy Installation
  • Light Weight

See All

Design Engineering 

Leather Look™ Sound Barrier

3 Parts

Leather Look™ Sound Barrier
  • Embossed Leather Grain
  • Insulate Interior From Unwanted Heat/Vibration
  • Moisture Resistant
  • Finishing Touch For Your Interior
  • Heat Resistant To 210Degrees F
  • 5/16 in. Thick

See All

Design Engineering 

Motorcycle Fairing/Bodywork Protection Kit

1 Parts

Motorcycle Fairing/Bodywork Protection Kit
  • 1 - 12 in. X 24 in. Reflect-A-Cool Sheet
  • 1 - 1.5 in. X 15 ft. Cool Tape Roll
  • 2 - 10 in. X 10 in. Extreme Heat Barrier Sheets
  • Great For Roadracing Bodywork
  • Replaces OEM Shielding
  • Provides Additional Heat Protection

See All

Design Engineering 

Reflect-A-Cool™

2 Parts

Reflect-A-Cool™
  • ProtProtect Wires/Cables/Hoses/Pipes/Tubing From Radiant Heatect Wires/Cables/Hoses/Pipes And Tubing From Radiant Heat
  • Radiant Heat Protection Up To 2000 Degrees F
  • Self-Adhesive Backing With Release Liner For Easy Installation
  • Moisture And Solvent Resistant
  • Virtually NO Clearance Needed
  • Light Weight And Flexible-Trim To Size
  • 0.0065 in. Thick
  • 36 in. X 48 in. Sheet

See All

Design Engineering 

Speaker Performance Vibration Dampening Kit

1 Parts

Speaker Performance Vibration Dampening Kit
  • Eliminate Squeaks/Rattles And Improve Acoustics
  • Flexible - Can Be Applied To Irregular Surfaces
  • Unaffected By Temperature Extremes
  • Works Great On Steel And Fiberglass Or Plastic
  • Easily Trim To Size/Peel And Stick
  • Includes Four 6 in. x 12.5 in. Sheets Of Damping Material

See All

  • Sound Dampening Control
  • Materials Are Abrasion And Tear Resistant
  • Easy To Install

See All

  • Use Sound And Radiant Heat Control
  • Perfect For Firewalls; Floorboards And Doors

See All

Design Engineering 

Thermal/Acoustic Interior Kit

1 Parts

Thermal/Acoustic Interior Kit
  • 41.7 Sq. Ft. Of Boom Mat Damping Material
  • 58.3 Sq. Ft. Of Under Carpet Lite Or 10 Ft. x 70 In
  • One 18 Oz. Can Of Boom Mat Spray-On

See All

Design Engineering 

Under Hood™ Thermal Acoustic Lining

1 Parts

Under Hood™ Thermal Acoustic Lining
  • Insulate From Heat While Reducing Noise And Vibration
  • Peel And Stick Application
  • Protects Paint Finishes
  • Resists Oil/Water And Contaminants
  • Use As A Heat And Noise Barrier To Control Under Hood Temp

See All

Design Engineering 

XL Damping Material

4 Parts

XL Damping Material
  • 4mm Thick Asphalt Free/Pure Butyl/Noise Constraining Layer
  • Top Skin Keeps Panels From Generating Noise
  • Worry Free No Sag Adhesion
  • First Choice Of The Industries Top Custom Car Builders

See All